Share:
Introducing GRIP's Innovative Pneumatic Grippers: Unrivaled Precision and Versatility in Handling Technology
Introducing GRIP's cutting-edge pneumatic grippers, the GP Parallel Gripper, and GZ Angular Gripper, which are renowned for their impeccable compactness and robust construction. These exceptional grippers are thoughtfully designed to deliver optimal performance across various applications. The product line includes five distinct sizes, ensuring a perfect fit for diverse industrial requirements.In 2009, GRIP proudly unveiled its pioneering pneumatic GI Internal Grippers, setting new standards in the industry. Building on this success, its GIS Internal Gripper was introduced in 2016, incorporating further advancements in design and functionality. The GIS Internal Grippers offer an extensive selection of 16 sizes, ranging from 5 to 20mm, catering to the specific demands of the esteemed customers.
GP Parallel Gripper
Parallel Gripper with linear jaw movement. The double-acting cylinder is actuated by compressed air which actuates the movements. The vertical movement is converted into opposing horizontal movement via two angularly arranged springs. The grippers are driven by wedge gear and can be equipped with a gripping force safety compression spring. The gripper position can be communicated using a reed switch on the drive cylinder (type "RS ..."). Depending on the installation, the gripping force safety device has a closing (GS) or opening (GÖ) effect.
The GP parallel grippers were developed to match the sizes of the quick-connect systems. The compact design of the gripper allows it to be used in the most difficult industrial conditions. The modular design makes possible a large number of high-quality design options while maintaining costs.
GP Parallel Gripper advantages:
- Wedge gear guided for optimal performance
- Extremely Durable
- Two-stroke version available
- Interface according to DIN EN ISO 9409-1
- The low-weight made of high-strength aluminum and steel
- Optional "open" and "close" gripping force safety compression spring
- Piston position communicated with a proximity switch ZG-RSGU01
GZ Angular Gripper
The Angular Gripper with pivoting jaw movement. The double-acting cylinder is actuated by compressed air which actuates the movements. An eccentric mechanism ensures a long service life and a constant gripping torque. In contrast to the Parallel Gripper, the gripping force safety device can only be designed as a closing -GS- version.
GZ Angular Gripper advantages:
- Interface according to DIN EN ISO 9409-1
- The low-weight made of high-strength aluminum and steel
- Extremely Durable
- Eccentric drive for constant gripping torque over the entire gripping range
- Uniform torque over the entire opening and closing range of the fingers
- The opening angle has 60 degrees of adjustability
- Optional "closing" gripping force safety device
- Piston position communicated with a proximity switch ZG-RSGU01
GI Internal Gripper
The GI Internal Gripper is an inflatable bellows gripper for internal gripping. The Internal Grippers plunge into bore holes. Applying pneumatic pressure to the silicone membrane increases the outer diameter. This friction against the bore hole wall holds the Gripper in place. The silicone membrane automatically retracts once the pressure is relieved.
GI Internal Gripper advantages:
- Enables gripping of objects with small bores
- Tapered end ensures smooth insertion/operation
- Available in multiple sizes 5mm-20mm (1mm increments)
- Operating temperature range: -40 to 300°Celsius
- Durable – over 500,000 cycles
- Replaceable silicone bladder
- Lightweight
- Simple gripping principle
- Excellent value
- Ideal for injection molding applications
GIS Internal Gripper Short
The GIS Internal Gripper Short is a further development of the GI Internal Gripper with an optimized gripping zone. The Internal Grippers plunge into boreholes. Applying pneumatic pressure to the silicone membrane increases the outer diameter. This friction against the borehole wall holds the Gripper in place. The silicone membrane automatically retracts once the pressure is relieved.
- Enables gripping of objects with small bores
- The blunt end allows full insertion (important in applications with limited hole depth)
- Available in multiple sizes 5mm-20mm (1mm increments)
- Operating temperature range: -40 to 300°Celsius
- Durable – over 500,000 cycles
- Replaceable silicone bladder
- Lightweight
- Simple gripping principle
- Excellent value
- Ideal for injection molding applications
Inquiry - Grippers
