Fluids as Working Agents

Blowgun (forging) with normal nozzle Ø1,5 mm (Thread M12 x 1,25)

The classic blowgun that has proved its usefulness a million times. Rich assortment of accessoires inchluding nozzles ,extensions and various air connectors.

Pistol-form in aluminium, anodized. Lever operation.

Blowgun with full- jet nozzle in (Alu) Ø 2,5 mm

Full-jet nozzle, wide jet with high air output by means of injector producing high blowing power at sound levels of around 90 dB (A). It is recommended that the full-jet nozzle is used at pressures not higher than 2 bar.

Blowgun with a combined safety and noise-silencing nozzle »Blowstar«

Blowstar, a combined safety and noise-silencing nozzle – to avoid risks and dangers when handling the energy carrier »compressed air«, in particular in direct skin contact. Working conditions are appreciably improved through a substantial reduction in noise to as low as 74 dB (A). In contrast, the noise level of conventional blow nozzles is more than 90 dB (A) at 6 bar. A reduction of the noise level by 8 dB (A) is experienced by the human ear already a half the noise.

Nevertheless, the principle of the full-cone nozzle results in excellent concentric blowing giving maximum efficiency. The resulting blowing power is 2.5 times higher than that of a classic single-hole nozzle.

Thus, the two-part »Blowstar nozzle« is the recommended choice especially for compressed air blow guns, but also as an individually used process nozzle.

It currently meets the following safety regulations and directives:

BG Institute for Occupational Safety (BIA)
BG regulation »Noise« (BGV B3, §3)
OSHA Regulations
Suisse Accident Insurance Institution (SUVA)

Blowgun with »Safetystar« extension

Star-shaped safety nozzle avoiding risks and dangers when handling the energy carrier »compressed air« in particular in direct skin contact. Improved working conditions because of reduction of noise down to 80 db (A) and below.

It currently meets the following safety regulations and directives:

BG Institute for Occupational Safety (BIA)
BG regulation »Noise« (BGV B3, §3)
OSHA Regulations
European Community Directive for machines 98/37/EG

Blowgun with dosage

Blowcontrol (diecasting) with normal nozzle Ø1,5 mm (thread M12 x 1,25)

The Aluminium blowguns with dosage are a further development of our model 269. The flow can be adjusted continuously by means of the lever up to the maximum power. This allows an individual adjustment of the blowing force suitable for a large range of applications.

All nozzles, as well as the extensions and accessories for the normal model 269, can be used with the adjustable blowgun.

Suction gun (Aluminium)

to dust and dirt such from splinters (After the change to surfaces dry suitable).

Polyamide Blowgun with dosage

The robust polyamide-blowgun with dosage out of blue crystal ball consolidated polyamide (longer life-time). As further development of the aluminium blowgun can be recommended in different applications such as weight- and material prefered reasons (textile industry, electronic devices etc…)

Infinitely variable with dosage adjustment by pressing the lever.

All nozzles and extensions from the aluminium blowgun are suitable for this blowgun.

Blowing set – airprofi –

Polyamide blowgun with dosage extension and PU-spiral hose

blowing set (3 m) – Polyamide blowgun with extension, spiral hose 3 m mounted with brass coupling and plug DN 7,2
blowing set (6 m) – Polyamide blowgun with extension, spiral hose 6 m mounted with brass coupling and plug DN 7,2
blowing set (6 m, safetystar-extension) – Polyamide blowgun with extension, spiral hose 6 m mounted with brass coupling and plug DN 7,2

Rubber Blowgun

This blowgun is the ideal unit for all situations in which sensitve surfaces must not be damaged through contact (dental and paint Spraying applications). Operation by bending the rubber mouthpiece. Recommended working pressure : 1 – 6 bar